# Complete Guide to SMT Production Lines: Process, Machines and Major Brands

An SMT production line assembles surface-mount components onto printed circuit boards through solder paste printing, inspection, component placement, reflow soldering and final inspection. Loaders, conveyors, material systems and software connect those processes. Correct line design depends on product mix, output, defect risk, traceability and changeover frequency.

The Complete Process

JUKI’s official overview describes the same relationships from printing through inspection. See JUKI SMT process.

What Each Process Contributes

The printer deposits paste through a stencil. SPI measures the print before costly parts are placed. Mounters feed, recognize and place components. Reflow heats the assembly according to a measured product profile. AOI evaluates visible features, while X-ray and electrical tests address evidence optical inspection cannot provide.

Handling equipment is also process equipment. Poor rails, belts, clamps or support can cause print and placement variation. Software connects programs, material verification, traceability and maintenance, but data is only useful when reaction rules are defined.

How to Size a Line

Start with boards per hour, placements per board, component range, lot size and available production time. Simulate every station, including changeover, reel replenishment, inspection and operator response. The slowest sustained process sets line output.

Request written evidence for:

• representative board and BOM;
• configured cycle time rather than maximum catalog CPH;
• feeder, nozzle and tray plan;
• printer and inspection acceptance results;
• oven thermal-profile window;
• labor, utilities and floor space;
• software, service, training and critical spares.

Major Platform Brands

ASMPT/SIPLACE, Fuji, Panasonic, Yamaha, JUKI and Hanwha are widely encountered placement platforms. Printer, inspection, reflow and handling markets also include specialist suppliers. Compare configured equipment and local support, not logos. Current starting points include JUKI products ve Fuji products.

Common Planning Mistakes

• sizing from theoretical CPH alone;
• omitting feeders, nozzles and changeover carts;
• testing only an easy board;
• ignoring board support and line balance;
• buying inspection without a review standard;
• approving oven setpoints without profiling the product;
• overlooking software ownership and obsolete spares.

Sık Sorulan Sorular

Hangi ekipmanlar olmazsa olmazdır?

En azından baskı, yerleştirme, yeniden akıtma ve kart işleme aşamaları. SPI, AOI, X-ray ve elektriksel testler, ürün riskine ve kanıt gereksinimlerine göre seçilir.

Farklı markalar tek bir seri oluşturabilir mi?

Evet, mekanik aktarım, sinyaller, veri arayüzleri ve destek sorumlulukları doğrulandığında.

Nelerin kabul testi yapılmalıdır?

Sustained output, process results, changeover, errors, traceability and recovery using representative products.

SMTBase is an independent parts supplier. Brand references do not imply authorization.