Guía sobre impresoras de pasta de soldadura: proceso, configuración y selección
A solder paste printer aligns a PCB with a stencil and transfers controlled deposits of solder paste onto component pads. Print quality depends on stencil design, paste behavior, board support, alignment, squeegee pressure and speed, separation, and cleaning. Select a printer around the product process window, not cycle time alone.
# Solder Paste Printer Guide: Process, Setup and Selection
A solder paste printer aligns a PCB with a stencil and transfers controlled deposits of solder paste onto component pads. Print quality depends on stencil design, paste behavior, board support, alignment, squeegee pressure and speed, separation, and cleaning. Select a printer around the product process window, not cycle time alone.
Printing Cycle and Controls
The printer loads and clamps the PCB, reads fiducials, supports the board, rolls paste across stencil apertures, separates the stencil and cleans its underside when required. JUKI’s RP-2 page illustrates current functions including paste replenishment, roll monitoring and aperture inspection.
| Control | Typical effect when wrong |
|---|---|
| Alignment | Deposits shift from pads |
| Pressure | Incomplete fill, scooping or stencil wear |
| Speed | Poor aperture filling or unstable rolling |
| Separation | Smear or incomplete release |
| Board support | Local variation and board flex |
| Cleaning | Blocked apertures or underside contamination |
Settings interact. More pressure may hide a blocked aperture while accelerating wear.
Common Defects
- Insufficient paste: check stencil, paste condition, pressure, speed and release.
- Bridging: check stencil underside, gap, slump and separation.
- Offset: check fiducials, clamps, board stretch and support.
- Volume drift: check paste roll, exposure time, cleaning and stencil wear.
- Local variation: check support pins, warpage, gasketing and aperture design.
SPI trends should be grouped by location and time so engineering can separate design/tooling patterns from material or machine drift.
Selection and Acceptance
Confirm board and stencil range, accuracy, support method, cleaning modes, paste control, traceability, cycle time and SPI feedback. Test the most difficult board and measure deposits with SPI. Include program creation, changeover, cleaning and sustained production.
Fuji states that its printer lineup uses pressure control and cleaning to address board warpage and material variation. Features like these must be demonstrated on the intended product. See Fuji printers.
Preguntas frecuentes
¿Puede SPI corregir una impresión defectuosa?
El SPI puede dar lugar a correcciones en el proceso; no repara la pasta ya impresa en una placa defectuosa.
¿Qué debe incluir una solicitud de presupuesto para una impresora?
Planos de placas, marco de plantilla, aberturas más pequeñas, pasta, producción, cambios de modelo, soporte, inspección y trazabilidad.
Fuentes primarias
¿Necesitas ayuda para identificar una pieza de recambio SMT?
Envía el modelo de la máquina, el número de referencia y unas fotos nítidas de las etiquetas. SMTBase analizará las opciones de suministro disponibles.
Contactar con SMTBase →